View GP522_552271.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

GP522 Controller Chip
PRELIMINARY DATA SHEET
FEATURES * 8 programmable resistors * 1 programmable switch * conforms to communication standard for programmable devices P/N 30381-000
DESCRIPTION
GP522
The GP522 is a single memory controller chip, designed as an array of resistors used to control functions of any signal processing integrated circuit. Controller consists of eight digitally programmable resistors and one switch. The GP522 can be programmed by any programmer supporting communication standard for programmable devices P/N 30381-00.
PACKAGING Chip (169 x 81 mils) Au Bump
R1A GP522 VBAT SDA 20 GND 69k5 Non-volatile memory (EEPROM) 5 10
R2A 6
R5A 4
R4A 8
R7A 1
R8A 21
R3A 16
R6A 13
R3 17 Programming Interface R1 R2 R5 R4 R7 R8 200k R6
11
R3C
49k5
100k
200k
500k
100k
12
R6C
200k SW 7 2 SW2 9 3 19 R8B 15 R3B 14 R6B
All resistors in ohms, all capacitors in farads, unless otherwise stated.
SW1
R4B R7B
BLOCK DIAGRAM
Revision Date: November 1999
Document No. 522 - 21 - 02
GENNUM CORPORATION P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3 tel. +1 (905) 632-2996 Web Site: www.gennum.com E-mail: hipinfo@gennum.com
ABSOLUTE MAXIMUM RATINGS
PARAMETER Supply Voltage Minimum Voltage on any pad Maximum Voltage on SDA pad Maximum Voltage on any other pad ESD rating of SDA pad ESD rating of any other pad Operating Temperature Range Storage Temperature Range VALUE
PAD CONNECTION
R8A R7A 1 21 2 20 19 18 17 16 GND R8B EXCLK SDA
1.4V DC -0.5V DC 17.5V DC VBAT 1500V 2000V 0C to 40C -40C to 70C
SW2
R3A
GP522
R7B 3 9 10 15 11 12 13 14 R3C R6C R6A R6B R3B
GP522
4
5
6
7
8
R5A VBAT R2A
SW1 R4A R4B R1A
CAUTION
ELECTROSTATIC SENSITIVE DEVICES
DO NOT OPEN PACKAGES OR HANDLE EXCEPT AT A STATIC-FREE WORKSTATION
CAUTION
ULTRA VIOLET RADIATION SENSITIVE
ELECTRICAL CHARACTERISTICS
PARAMETER Supply Voltage Supply Current EEPROM read/write cycles Clock Frequency SW Resistance (ON) SW Leakage (OFF) Data 0 - Input Current Data 0 - Input Current Data 1 - Input Current Data 1 - Input Current PROGRAMMING OPERATION Programming Voltage Programming Current Data to Program Pulse Program Pulse Rise Time Program Pulse Fall Time Pulse Width Data Bit Cycle Synchronization
Conditions: Temperature 25oC.
SYMBOL VBAT IDD IDDq
CONDITIONS
MIN 1.1 40
TYP 1.25 45 5 150 -60 -30 +60 +30
MAX 1.4 50 225 1 1 +20% +40% +20% +40%
UNITS V A A cycles kHz k A A A A A
Current reference disabled
1000
CLOCK RON ILEAK
Calibrated value
120 -
Write Read Write Read
-20% -40% -20% -40%
VPRGM IPRGM tPDATAPRG tPRGRISE tPRGFALL tWPR tCYCLE tSYNC
Fig. 1
15.5 -
16 100 1.28 tCYCLE/6
16.5 10 2 1.5 10 1.60 -
V A ms ms ms ms ms
Fig. 1 Fig. 1 Fig. 1 Fig. 1
1 1 0.5 5 0.85 -
NOTE: During Power Down resistors go to the maximum values.
522 - 21 - 02
2
tWPR
VPRGM
GP522
Vbat GND
tPDATAPRG
tPRGRISE
tPRGFALL
Fig. 1 Programmer Program Pulse Timing
R1 [CROSSOVER] = 69.5k 25% DC referenced to VSS, AC = 0,0mVRMS.
TAP 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 BIT 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 BIT 2 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 BIT 3 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 BIT 4 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 RATIOMETRIC VALUE (%) 100.0 86.33 74.10 63.31 55.31 44.87 38.08 30.86 26.12 21.58 15.93 12.40 9.37 6.25 3.95 N/A RATIOMETRIC TOLERANCE (%) N/A 7 7 7 7 9 9 9 12 12 12 16 22 23 28 N/A NOMINAL TAP VALUE 69.5 60.0 51.5 44.0 38.4 31.2 27.2 21.4 18.2 15.0 11.1 8.62 6.51 4.35 2.75 0.5 MAX UNITS k k k k k k k k k k k k k k k k
3
522 - 21 - 02
R2 [THRESHOLD] = 49.5k 25% DC referenced to VSS, AC = 0, 0mVRMS.
TAP BIT 5 BIT 6 BIT 7 BIT 8 RATIOMETRIC VALUE (%) 100.00 82.64 68.62 54.75 46.06 36.02 30.38 24.64 20.27 13.58 10.91 7.47 5.88 3.88 2.42 N/A RATIOMETRIC TOLERANCE (%) N/A 7 9 9 9 9 11 11 12 16 23 16 20 22 32 N/A NOMINAL TAP VALUE 49.5 40.9 34.0 27.1 22.8 17.8 15.0 12.2 10.0 6.72 5.40 3.70 2.91 1.92 1.20 0.15 MAX UNITS
0 1
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1
0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
k k k k k k k k k k k k k k k k
GP522
2 3 4 5 6 7 8 9 10 11 12 13 14 15
R3 [LOW RATIO] = 100k 40% DC referenced to VSS + Vbe, AC = 100,100mVRMS.
TAP BIT 9 BIT 10 BIT 11 BIT 12 RATIOMETRIC VALUE (%) N/A 7.14 13.67 19.509 27.37 33.40 40.40 46.70 53.50 59.40 67.17 73.50 80.00 86.50 93.50 100.00 RATIOMETRIC TOLERANCE (%) N/A 14 11 9 7 7 7 7 7 7 7 7 7 7 7 N/ A NOMINAL TAP VALUE 0.5 MAX 14.3 27.3 39.0 54.7 66.8 80.8 93.4 107 119 134 147 160 173 187 200 UNITS
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1
0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
k k k k k k k k k k k k k k k k
522 - 21 - 02
4
R4 [LOW CUT] = 200k 25% DC referenced to VSS + 400mV, AC = 140, 140mVRMS.
TAP BIT 13 BIT 14 BIT 15 BIT 16 RATIOMETRIC VALUE (%) 100.00 71.71 50.00 35.76 24.40 16.40 11.11 6.93 6.80 5.30 3.78 2.55 1.98 1.46 1.18 N/A RATIOMETRIC TOLERANCE (%) N/A 7 7 7 9 9 11 11 7 14 14 17 17 17 22 N/A NOMINAL TAP VALUE 200 143 102 71.5 48.8 32.8 22.2 13.9 13.6 10.6 7.57 5.10 3.95 2.91 2.37 0.14 MAX UNITS
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1
0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
k k k k k k k k k k k k k k k k
GP522
R5 [OUTPUT] = 100k 25% DC referenced to VSS, AC = 0,0mVRMS.
TAP BIT 17 BIT 18 BIT 19 BIT 20 RATIOMETRIC VALUE (%) 100.00 85.26 72.07 60.00 50.00 42.00 36.50 30.30 25.63 20.58 18.30 15.91 13.74 10.58 9.38 7.90 RATIOMETRIC TOLERANCE (%) N/A 7 7 7 7 7 7 9 9 11 11 11 11 16 16 N/A NOMINAL TAP VALUE 100 85.3 72.1 60.0 50.0 42.0 36.5 30.3 25.6 20.6 18.3 15.9 13.7 10.6 9.38 7.90 UNITS
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1
0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
k k k k k k k k k k k k k k k k
5
522 - 21 - 02
R6 [HIGH RATIO] = 200k 40% DC referenced to VSS + Vbe, AC = 1000, 100mVRMS.
TAP BIT 21 BIT 22 BIT 23 BIT 24 RATIOMETRIC VALUE (%) N/A 7.14 13.67 19.60 27.10 33.40 40.40 47.17 53.50 60.00 67.17 73.50 80.00 86.50 93.50 100.00 RATIOMETRIC TOLERANCE (%) N/A 15 10 7 7 7 7 7 7 7 7 7 7 7 7 N/A NOMINAL TAP VALUE 0.5 MAX 14.3 27.3 39.2 54.2 66.8 80.8 94.3 107 120 134 147 160 173 187 200 UNITS
0 1
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1
0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
k k k k k k k k k k k k k k k k
GP522
2 3 4 5 6 7 8 9 10 11 12 13 14 15
R8 [HIGH CUT] = 100k 25% DC referenced to VBAT, AC = 880, 880mVRMS.
TAP BIT 30 BIT 31 BIT 32 BIT 33 RATIOMETRIC VALUE (%) 100 12.06 7.17 6.16 4.22 3.65 2.62 2.28 1.88 1.68 1.23 0.90 0.71 0.56 0.44 N/A RATIOMETRIC TOLERANCE (%) N/A 12 13 12 12 12 12 12 12 12 12 12 12 12 14 N/A NOMINAL TAP VALUE 100 12.1 7.17 6.16 4.22 3.65 2.62 2.28 1.88 1.68 1.23 0.90 0.71 0.56 0.44 0.14 MAX UNITS
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1
0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
k k k k k k k k k k k k k k k k
522 - 21 - 02
6
R7 [GAIN] = 500k 25% DC referenced to VSS + Vbe, AC = 0, 210mVRMS.
TAP BIT 25 BIT 26 BIT 27 BIT 28 BIT 29 RATIOMETRIC VALUE (%) 100.00 89.97 81.43 75.02 68.34 60.88 55.31 45.29 35.00 28.40 17.32 15.60 8.67 6.40 4.20 3.10 2.31 1.50 1.16 0.73 0.56 0.42 0.32 N/A RATIOMETRIC TOLERANCE (%) N/ A 7 7 7 7 7 7 7 7 7 7 7 10 10 10 12 14 21 22 22 22 22 22 N/A NOMINAL TAP VALUE 500 450 407 375 342 304 277 226 175 142 86.6 78.0 43.4 32.0 21.0 15.5 11.6 7.50 5.78 3.66 2.80 2.10 1.58 0.15 MAX UNITS
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1
0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
k k
GP522
k k k k k k k k k k k k k k k k k k k k k k
R1A
R2A 6
R5A 4 8
R4A 1
R7A 21
R8A 16
R3A 13
R6A
GP522
5 VBAT 17 SDA 20 GND Non-volatile memory (EEPROM) Programming Interface
10
R3 R1 R2 R5 R4 R7 R8 200k R6
11
R3C
69k5
49k5
100k
200k
500k
100k
12
R6C
200k SW 7 2 SW2 9 3 19 R8B 15 R3B 14 R6B
All resistors in ohms, all capacitors in farads, unless otherwise stated.
SW1
R4B R7B
Fig. 2 Production Test Circuit 7
522 - 21 - 02
PAD LAYOUT
PAD NO. X Y
CHIP DIMENSIONS
4293 MAX (169 MAX ) 185 (7.28)
1 2 3 4
0 [0.0] 564 [22.2] 1123 [44.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1682 [66.2] 1123 [44.2] 564 [22.2] 0 [0.0] 0 [0.0] 0 [0.0] 0 [0.0] 0 [0.0]
0 [0.0] 0 [0.0] 0 [0.0] 379 [14.9] 633 [24.9] 900 [35.4] 1903 [74.9] 2157 [84.9] 2411 [94.9] 2665 [104.9] 3161 [124.4] 3415 [134.4] 3669 [144.4] 3923 [154.4] 3923 [154.4] 3923 [154.4] 3923 [154.4] 3536 [139.2] 1707 [67.2] 1276 [50.2] 3079 [121.2]
185 (7.28)
1
21
20
19
18 16
17
Cell 0,0
2
GP522
3 4 5 6 7 8 9 10 15 11 12 13 14
GP522
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
2057 MAX (81 MAX)
SPECIFICATIONS
DIE THICKNESS MIN BOND PAD OPENING BUMP SPEC DOCUMENT 254m [10mils] MAX
Dimensions are in micrometers. Dimensions shown in parenthesis are in mils converted from micrometers, and include minor rounding errors. 1 mil = 25.4m
Attention: The GP522 Controller Chip is visually inspected at an AQL of 0.65% based on MILSTD105E sampling plan, rather than being subjected to 100% visual inspection.
GENNUM CORPORATION
MAILING ADDRESS: P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3 Tel. +1 (905) 632-2996 Fax +1 (905) 632-2814 SHIPPING ADDRESS: 970 Fraser Drive, Burlington, Ontario, Canada L7L 5P5
REVISION NOTES:
Corrections to Pad Connection diagram and Electrical Characteristics table.
DOCUMENT IDENTIFICATION: PRELIMINARY DATA SHEET
The product is in a preproduction phase and specifications are subject to change without notice.
GENNUM JAPAN CORPORATION
C-101, Miyamae Village, 2-10-42 Miyamae, Suginami-ku, Tokyo 168-0081, Japan Tel. +81 (3) 3334-7700 Fax: +81 (3) 3247-8839
Gennum Corporation assumes no responsibility for the use of any circuits described herein and makes no representations that they are free from patent infringement. (c) Copyright April 1999 Gennum Corporation. All rights reserved.
Printed in Canada.
522 - 21 - 02
8

▲Up To Search▲

Price & Availability of GP522

	To Download GP522 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .